Calling all pressurized CO2 system experts...need help!

[liquid_krystale]

Hi,

I just picked up a Clippard minimatic mouse solenoid and realized that I have a bunch of add-ons I need to buy to run it. Problem is I have noooooooo idea what I'm doing with regards to setting up this CO2 system. Ask me what a regulator was 4 months ago and all you would've gotten would've been a blank stare. I've come a long way since then but I need to figure out what I need (in terms of fittings, wiring, etc) to put together a proper setup.

So, back to the Clippard solenoid. From my research, I think it requires 1) An 120 V AC to 24 V DC adapter, 2) manifold mount, 3) some sort of outlet adapter for 10/32 manifold (no clue here)

I have absolutely no idea about where I can get these parts. Are they found at a regular hardware store, or do I have to go to a welding/brewing shop? I tried to find the voltage adapter on ebay but the ones I see look like they're for cell phones.

Any and all help is greatly appreciated!

Also, I am in need of the regulator and a quality needle valve around to complete this setup. If anyone has (or knows where to get one) a used industrial compressed gas regulator and needle valve (prefer fabco, swagelock, etc similar type brands) please PM me.

[CRS Fan]

I wish I could help. My regulators have mostly been Milwaukee 957's with no expertise needed. Hopefully a pipe-fitter/plumber will chime in to help.

Best regards,

Stuart

[tang daddy]

Well it won't be long before Gary chimes in as he knows alot about what you're trying to build and where to order the stuff from. I can tell from the route you're taking this will be a high end set up with all the bells and whistles. If he doesn't reply you could always try pming him 2wheelsX good luck!

[liquid_krystale]

Thanks tangdaddy. I was dosing the metricide I got off of you...but I'm absolutely terrible when it comes to keeping a consistent dosing schedule, and my plants suffer.

I initially wanted a high quality complete, ready to use setup. I don't plan on upgrading, so why not get the best right off the bat, right? If you still had yours I would've bought if off of you in a heartbeat, but as it stands, I have to scrounge around to find the right parts.

[Jojodog]

If this the solenoid valve u have
http://www.clippard.com/store/byo_el...use_valves.asp this adapter will work for you.
AC/DC Adapter - 24VDC 0.5A

I'll be tied till mid next week. If no one else can help b4 then, I can give u a hand

Cheers

Dan

[2wheelsx2]

Unfortunately I have not run a Mouse Solenoid, but want to. Are you on plantedtank.net? Check with the OP here, since he builds them, and uses those: The Planted Tank Forum

[liquid_krystale]

If this the solenoid valve u have
http://www.clippard.com/store/byo_el...use_valves.asp this adapter will work for you.
AC/DC Adapter - 24VDC 0.5A

I'll be tied till mid next week. If no one else can help b4 then, I can give u a hand

Cheers

Dan

Thanks Dan,

I'm just wondering though, since the plug from the adapter is a barrel style one and the connection from the solenoid is a 2 prong design, how I would make that work in terms of connecting them.

[liquid_krystale]

Thanks 2wheelsx2 for the tip,

I've msged Bettatail about getting the fittings, manifold, etc I'll need. Looks like he's super pro at building setups and can get me everything I need.

[2wheelsx2]

That's good to hear. I didn't want to steer you wrong by giving you advice where I'm not comfortable.

[Jojodog]

You will to cut the connector off the adapter and hardwire the 2 leads to the prongs on the solenoid.