LinkBack URL
About LinkBacksi got my manifolds in the mail and it became quite obvious i forgot to request one of them have barbs (or andor fittings) on all sides, so i believe its a MNPT (SP?) 10/32 thread i need to replace
these are the manifolds i own, One connects to the tank and so the fittings will work out for me on that one, the other goes at location between two tanks, so it will need some sort of fitting replaced or added on. Im hoping i could find them at rona, but im not sure. Anyone have any suggestions where i can buy these, hardware stores included. Preferably nearby united blvd/lougheed stretch, or coquitlam center (bus route)
Where The BC Aquatic Community Meets for already registered members
Results 1 to 10 of 10
Co2 fittings!
This is a discussion on Co2 fittings! within the Plants/Algae/Ferts/EI/CO2/Lighting forums, part of the Aquarium Related Chat category; i got my manifolds in the mail and it became quite obvious i forgot to request one of them have ...
- 12-20-2011 #1
Plant Obsessed
- Join Date
- May 2010
- Location
- Coquitlam/Westwood Plateau
- Posts
- 2,289
Co2 fittings! 29G Community Tank || 9.8G Twin Tanks || 2.5G Nano Tank
Neven's Planted Addiction
Affliliations: VAHS #43, BCA PA14, TPT FP116; aka outcast on tpt
- 12-20-2011 #2
Master of Nothingness
- Join Date
- May 2010
- Location
- Coquitlam
- Posts
- 3,231
- 12-21-2011 #3
Forum Snooper
- Join Date
- Dec 2011
- Location
- Surrey
- Posts
- 128
If you bring that in to any welding store they would have all the fittings.
Probably even Princess Auto and KMS
- 12-21-2011 #4
Master of Nothingness
- Join Date
- May 2010
- Location
- Coquitlam
- Posts
- 3,231
Barb fitting for airline are actually very difficult to find locally. Welding shop don't use those small sizes.
Easiest way to get those are the nylon nipples that come with wood air stones. JL has them and KE should have around 200 in stock.
- 12-21-2011 #5
Plant Obsessed
- Join Date
- May 2010
- Location
- Coquitlam/Westwood Plateau
- Posts
- 2,289
I just visited kms and they don't carry anything that small
Sent via Tapatalk; SGH-T589R29G Community Tank || 9.8G Twin Tanks || 2.5G Nano Tank
Neven's Planted Addiction
Affliliations: VAHS #43, BCA PA14, TPT FP116; aka outcast on tpt
- 12-21-2011 #6
Master of Nothingness
- Join Date
- May 2010
- Location
- Coquitlam
- Posts
- 3,231
You did not stop by on the way up the hill
Originally Posted by neven 
- 12-21-2011 #7
Plant Obsessed
- Join Date
- May 2010
- Location
- Coquitlam/Westwood Plateau
- Posts
- 2,289
Ill be passing your place in a minute, at colony farms atm
Sent via Tapatalk; SGH-T589R29G Community Tank || 9.8G Twin Tanks || 2.5G Nano Tank
Neven's Planted Addiction
Affliliations: VAHS #43, BCA PA14, TPT FP116; aka outcast on tpt
- 12-21-2011 #8
Forum Snooper
- Join Date
- Dec 2011
- Location
- Surrey
- Posts
- 128
Thats too bad you did not find any. Airhose is very small compared to actelylene/oxygen hoses. I just looked and I had one spare nipple for one of the hoses and it was a real pita to get the airline onto it. But I put the airline and fitting in boiling water and was able to just get it on. Would not work in the long term.
I'll have to remember KE has 200
Thanks
- 12-21-2011 #9
Plant Obsessed
- Join Date
- May 2010
- Location
- Coquitlam/Westwood Plateau
- Posts
- 2,289
i'll try rona tomorrow most likely, they carry sizers that small, its a standard pipe thread to 1/8nipple or compression that i need actually. KMS has every that fit onto the fitting, just not the right size barb to adapt to
29G Community Tank || 9.8G Twin Tanks || 2.5G Nano Tank
Neven's Planted Addiction
Affliliations: VAHS #43, BCA PA14, TPT FP116; aka outcast on tpt
- 12-21-2011 #10
Master of Nothingness
- Join Date
- May 2010
- Location
- Coquitlam
- Posts
- 3,231
Reply With Quote