British Columbia Aquarium Forums banner
1 - 10 of 10 Posts

· Registered
331 Posts
Discussion Starter · #1 ·
2) Small foot Print LED fixtures. I have 3 that was going to use on my 4' tank but decide to change my 4' tank to a 3' semi cube tank when I was moving. So these 3 fixtures are all brand new never used. This is a CREE fixture so it is quite strong. Make sure you don't crank it all the way to max if your tank never had LED fixture on it before as it will melt your corals.It comes with hanging kit only, no stands.

Asking $150 each

Here is what it looks like on a single 2' tank

Below is the PAR reading I recorded just to give u an idea.


Input Voltage: 100V - 240V
Power: 96W
Item Size in Inches: 11.97 x 6.10 x 2.36H
White LED: 2pcs x 40W 7500K - 8000K
Red LED: 3pcs x 2W
Orange LED: 2pcs x 2W
Green LED: 3pcs x 2W
Lumens: 7000 LM
Local area network by one master
Control by master
More than 1180000 Lighting effects.
Adjustable holder lamp & Adjustable hang lamp
Function (Remote Control):
1. Timer Setting - dawn, sunrise, daytime, sunset, nighttime
2. level adjust for LED.
3. Simulate clouds moving
4. Simulate lighting
5. Demo for one day effect
6. C/F Temperature show
7. 12/24 hour clock

Check out this youtube for the same light on the tank.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.