[Jcmalouie]

Does anyone have an extra one for sale?

or know any stores that sell them?

I know they were discontinued, but I thought I would give it a shot here.

Thanks in advance.

Amazon.com : Spray Bar Kit for Fluval External Power Filter : Aquarium Power Filters : Pet Supplies

 

[Jcmalouie]

bump, anyone know where to get one? or has extra for sale?

 

[outsider]

That kit is discounted.

However

I bought up rain bar unit from Ebay saller and it work with Fluval tube. The only down side the item is shipped from Taiwan which is going to take a while for the item to arrive.

UP Rain BAR Unit FOR 150 59"Aquarium Fish Tank Outflow Pipe 16 22mm CO2 Plants | eBay

 

[cpat83]

You can pretty much make your own out of PVC and it will cost you 5-10 bucks, and it will give you enough material to make several or other projects.

 

[Jcmalouie]

That kit is discounted.

However

I bought up rain bar unit from Ebay saller and it work with Fluval tube. The only down side the item is shipped from Taiwan which is going to take a while for the item to arrive.

UP Rain BAR Unit FOR 150 59"Aquarium Fish Tank Outflow Pipe 16 22mm CO2 Plants | eBay

outsider, do you have a picture of yours setup with that kit?

 

[outsider]

outsider, do you have a picture of yours setup with that kit?

Ya..

I place the spray bar and side of tank and I do have to cut one section of spray bar shoter to fit the side of tank I only used 1 and 2/3 section of bar. (My tank is fluval 45G bow front tank.) The kit come with 9 section of spray bar, 1 90 degree L elbow, 1 large end cap, 1 small end cap and 5 suction cut and holder.. The kit work with fluval tube is D-605.

Picture taken today.



You can run the spray bar cross the back of tank if you want. I decide to place at side of tank because I don't want to place co2 diffuser at front of tank.

Picture taken May 17 2015.

 

[Jcmalouie]

i have a fluval 206, will the spray bar connect directly into the stock rubber fitting?

There are two versions on ebay with two different diameter tubes. 16mm and 21.5mm.
Which one did you get?

can you take a closeup shot of the fitting to the tubing?

thanks a lot!

 

[cypho]

i have 2 sizes of rain bar with all attachments, brand new in box.
call or text me at 604-328-0442
thanks
barry

 

[outsider]

i have a fluval 206, will the spray bar connect directly into the stock rubber fitting?

There are two versions on ebay with two different diameter tubes. 16mm and 21.5mm.
Which one did you get?

can you take a closeup shot of the fitting to the tubing?

thanks a lot!

My filter is 306 which I believe use the same tube as 206.

Up rain bar D605 is 22mm which is the one I bought last year. (Also I linked in my previous post.)

 

[Jcmalouie]

thank you!

 

[Jcmalouie]

ordered the Up rain bar D605 kit. i'll let you know how it goes.

 

[outsider]

ordered the Up rain bar D605 kit. i'll let you know how it goes.

Good luck. The waiting part is the worst part. >_< .. Since I usually have to wait about 2 months for my package to arrive, however I guess i can't complain since it is always free shipping.